Thanks so much for downloading this model!

All you have to do is print one of each file from the main folder into your slicer, arrange, and hit print.

I have also provided a pre layout for 205x205 or bigger bed sizes to save you some time. This does not include the snowflake parts.

If you have any questions or need any help while printing or assembling this piece, 
please do not hesitate to reach out to me at jbvcreative@gmail.com

--Recommended print settings--
PLA Material
0.4mm nozzle
0.2mm layer height
15%-18% infill

Total Print Time: ~12 Hours
Total Material: ~155g


**No Support Necessary! This model was specifically designed for this material and print settings - I can't 
guarantee it will work with other materials.  Feel free to email me if you have any questions

If you would like to support my channel, you can do so by subscribing to my youtube channel, following me on instagram, or becoming a patreon member. Links are below:

www.instagram.com/jbvcreative
www.youtube.com/c/jbvcreative
www.patreon.com/jbvcreative

Disclaimer: These files are for personal use only and cannot be copied or sold. 
If you have any questions, feel free to reach out.

©JBVCreative